Ceramic Wall and Ground Tile Adhesive

powdery material premixed with the basic material of sulfate-aluminate cement, Portland cement, lots of other inorganic silicate Polar Bear tile adhesive is one kind of pre-mixed powder that based on calcium sulphoaluminate,mixed with Portland cement, other inorganic silicate materials and additive agent in a appropriate proportion. Specification  

Item	Type
	C1-1	C1-2	C1-3	C1F	C1T	C2
Bond Strength (MPa)	≥0.5	≥0.6	≥0.7	≥0.5	≥0.6	≥1.0
Bond Strength in water(MPa)	≥0.5	≥0.6	≥0.6	≥0.5	≥0.6	≥1.0
Bond Strength after heating and aging(MPa)	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥1.0
Bond Strength after freezing or thawing(MPa)	≥0.5	≥0.5	≥0.6	≥0.5	≥0.6	≥1.0
Early bond Strength (24h/MPa)				≥0.5
Bond Strength open time 20 min(MPa)	≥0.5	≥0.5	≥0.5		≥0.5
Bond Strength open time 10 min (MPa)				≥0.5
Slip (mm)					≤0.5

             Performance1.      High early strength and bond strength.  Walking and crack-sealing after 2 hours in normal    temperature.2.      Reduce working procedures. Using this product achieves efficiency result without immersing.3.      Water resistance strength and freezing-thaw resistance strength are better than Portland cement.4.      It has excellent water retaining property. The adhesive layer is thin and homogeneous.5.      It has good hydration under low temperature, and could be used under negative temperature according to our direction Applications 1.  CSA Tile Adhesive make it ideal for bonding ceramic tile, fictile, slab-stone, floor tile etc.2.      Can be used to bond concrete wall and stone, and expanded polystyrene.3.      Can be used in projects which request quick hardening and time constraint situations. Selection 

Recommendation	CSA Tile Adhesive
	C1-1	C1-2	C1-3	C1F	C1T	C2
Floor tile (indoor and outdoor)
Facade Ceramic tile (indoor)
Facade Ceramic tile (outdoor)
Facade Ceramic tile (high-rise)
Marble brick plane
Marble brick facade
Smoothing surface

            Tips of Usage     Special crack sealer agent should be used when filling the slot.    When working on slab-stone with size over 600×600×20mm,the uprightness is better for lower than 6m. Reinforcement is needed when over 6m.  Packing and Storage Pack with 25kg bags.Polar Bear Tile Adhesive should be stored in dry environment, and it can be stored for at least 6 months with original package.

Ceramic Wall and Ground Tile Adhesive